Browse by Job:
Case Studies
Tried and tested. Learn how GPT is bringing value to operators in all corners of the world with real world examples.
An oil and gas operator located in Australia approached GPT Industries as they were encountering an issue with two flange connections that were experiencing leakage issues within hours of installation. […]
A long-established midstream oil and gas operator had been experiencing long term issues with Phenolic isolation gaskets. They approached GPT seeking a solution that would give them longer service life […]
A water authority situated in Texas approached GPT industries to support a large-scale project with the aim of shifting underground well water to surface water. The project which spans 79.8 […]
GPT_EVO_Electrical Bridging_06.2022(F)A problem that is becoming more and more common place in industry is electrical bridging. For years, this customer has battled losing isolation across the flange isolation kit, not […]
On a Flare Gas Recovery Unit, there are Carbon Steel flanges being bolted to A2205 Duplex Stainless-Steel flanges on the flare gas piping. As a result of the dissimilar metal, […]
A utility company operating out of the east of America approached GPT as they had encountered a leak and isolation failure following hydro-testing of their pipeline. The monolithic isolation joint […]
An operator of an established Oil field in the UAE approached GPT after encountering the same persistent problem with its flange isolation gaskets (kit) across two sites. Two years after […]
A multinational gases, technologies and services company was seeking an isolation solution for a pipe connection which had been prone to corrosion, the pipe carried Hydrogen and Nitrogen Gas, it […]
A global oil and gas operator was seeking a gasket solution for a new offshore platform that was to operate in the Gulf of Mexico. The large-scale offshore platform which […]
Pipeline operators based on the west coast of the United States started to notice that their flanges were beginning to experience shorts. Upon inspection it was identified that this was […]
A gas compressor manufacturer was looking for an insulation kit to be fitted to one of its compressors, located on an offshore platform within the Persian-Arabic Gulf. As the gas […]
An operator of an established Oil field in the UAE approached GPT after encountering the same persistent problem with its flange isolation gaskets (kit) at two sites. Two to three […]
Engineering firm had a refinery client that had a high temperature and pressure application that also needed to be fire rated.
An expansion device was being installed downstream of a control valve. This expansion device was made of SS316, while the upstream piping to the device was A106B, and the downstream […]