Browse by Job:

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Home

Case Studies

Case Studies

Tried and tested. Learn how GPT is bringing value to operators in all corners of the world with real world examples.

Search by Name

Search by Name

Filter by File Type

Filter by File Type
Case Study - Hydrogen

A multinational corporation specializing in gas technologies, and services needed a solution to isolate and seal a pipe connection prone to corrosion. This particular pipe transported Hydrogen and Nitrogen Gas, […]

View
Case Study: Permeation Elimination & High Dielectric Strength

An oil and gas operator located in Australia approached GPT Industries as they were encountering an issue with two flange connections that were experiencing leakage issues within hours of installation. […]

View
Case Study: The Multiple Failures of Phenolic Gaskets

A long-established midstream oil and gas operator had been experiencing long term issues with Phenolic isolation gaskets. They approached GPT seeking a solution that would give them longer service life […]

View
Case Study: Large Diameter Water Pipeline Project

A water authority situated in Texas approached GPT industries to support a large-scale project with the aim of shifting underground well water to surface water. The project which spans 79.8 […]

View
Case Study: Electrical Bridging

GPT_EVO_Electrical Bridging_06.2022(F)A problem that is becoming more and more common place in industry is electrical bridging. For years, this customer has battled losing isolation across the flange isolation kit, not […]

View
Case Study: Flare Gas Recovery Unit - EVOLUTION®

On a Flare Gas Recovery Unit, there are Carbon Steel flanges being bolted to A2205 Duplex Stainless-Steel flanges on the flare gas piping. As a result of the dissimilar metal, […]

View
Case Study: Gas Pipeline MIJ

A utility company operating out of the east of America approached GPT as they had encountered a leak and isolation failure following hydro-testing of their pipeline. The monolithic isolation joint […]

View
Case Study: Hydrogen Sulfide

An operator of an established Oil field in the UAE approached GPT after encountering the same persistent problem with its flange isolation gaskets (kit) across two sites. Two years after […]

View
Case Study: Installation Made Easier with EVOLUTION®

A multinational gases, technologies and services company was seeking an isolation solution for a pipe connection which had been prone to corrosion, the pipe carried Hydrogen and Nitrogen Gas, it […]

View
Case Study: Large Offshore Project

A global oil and gas operator was seeking a gasket solution for a new offshore platform that was to operate in the Gulf of Mexico. The large-scale offshore platform which […]

View
Case Study: Loss of Isolation due to metal particle build-up

Pipeline operators based on the west coast of the United States started to notice that their flanges were beginning to experience shorts. Upon inspection it was identified that this was […]

View
Case Study: Offshore - Sour Service

A gas compressor manufacturer was looking for an insulation kit to be fitted to one of its compressors, located on an offshore platform within the Persian-Arabic Gulf. As the gas […]

View
Case Study: Permeation of GRE Isolation Gasket

An operator of an established Oil field in the UAE approached GPT after encountering the same persistent problem with its flange isolation gaskets (kit) at two sites. Two to three […]

View
Case Study: Pikotek® VCXT™ - Refinery

Engineering firm had a refinery client that had a high temperature and pressure application that also needed to be fire rated.

View
Case Study: Steam

An expansion device was being installed downstream of a control valve. This expansion device was made of SS316, while the upstream piping to the device was A106B, and the downstream […]

View
chevron-down