Usted está aquí

MTS Gaskets

The MTS gasket is an all metal gasket constructed of 316SS with a spiral wound seal and Nitrile Rubber O-ring.

The MTS is great for emissions control and is able to handle high pressure applications. This type of gasket is easy to install and also helps keep flanges within EPA compliance.

Recommended Applications

  • Marine & Naval Vessels
  • Water
  • Hydrocarbon 
  • Heat Exchangers
  • Offshore Rigs

Features and Benefits:

  • Superior gas tight pressure-energized sealing
  • Zero leakage 
  • Easy installation, make-up and removal
  • Low required bolt loads
  • Self-aligning
  • High Integrity
  • Maintenance-Free
  • Protects flanges from media-induced corrosion and flow-induced erosion
  • Increases flange and bolt external load bearing capabilities (bending and tension) 
  • Increases flange support with a larger load bearing surface area
  • Increases resistance to seal relaxation caused by thermal/pressure cycling
  • Resistant to high chloride applications
  • Meets MIL-PRF-32187A Type II
  • Cage code 0JM95

Nominal Thickness: 1/8”/3.2mm 

Temperature Rating: 250°F/120°C


Sizes & Pressure offerings 

  • Available in sizes ½” - 12”
  • Up to 2,500# pressure rating

Recursos

Ingeniería de aplicaciones

Sr. Applications Engineer
Dirección de correo electrónico:
Teléfono (Oficina):
Regiones:
Medio Oriente

Ventas

Sr. Applications Engineer
Dirección de correo electrónico:
Teléfono (Oficina):
Regiones:
Medio Oriente