Nitrile coated G10 isolating gaskets are coated with a nominal .063”(1.5mm) nitrile coating on each side of the G10 core from the ID to the OD of the gasket. The total gasket thickness is a nominal .187” ( 5mm). All contact areas of the gasket are effectively a sealing point. The gasket requires more load to seal than a LineBacker or PGE gasket, but will perform well where pitted flanges, warped flanges or non-parallel flanges (such as non-metallic flanges with molded, concentric convex rings) exist.
FEATURES AND BENEFITS
- Great for non-potable water applications
- Great for non-metallic flanges
- .063” thick G10 core with .063” thick Nitrile (NBR) coating on each side, overall compressed thickness 0.187"
- Temperature rating: -30°F min (-34°C) to 230°F max (110°C)
- Non-potable water
- Utility gas applications
- Aliphatic hydrocarbons