You are here

Century-Line™ Pipe Penetration Sleeves

Century-Line™ Pipe Penetration Sleeves are used to create circular sleeved holes in concrete poured barriers including walls, floors, ceilings, structural supports and tank footings.

Molded from non-conductive, high-impact resistant HDPE, Century-Line™ sleeves are lightweight and easily installed by one construction worker. In the event of a field or engineering change, sleeves may be cut shorter at the job site using ordinary hand tools. Century-Line™ sleeves are easy to stock and far less expensive to ship than steel sleeves.

FEATURES AND BENEFITS

1/8 the weight of steel

Century-Line™ sleeves are light enough for one worker to install without a crane, hoist or helper, reducing installation time and costs. Century-Line™ sleeves are easy to stock and far less expensive to ship than steel sleeves.

Resists water migration

The 2” (50.8 mm) water stop collar not only anchors the sleeve in position but creates a path against the migration of water around the outside of the sleeve.

Adjusts to Wall Thickness

Century-Line™ sleeves unique, hollow water stop collar works like an expansion joint, adjusting (up to 1/2”) to the thickness of wall. This design creates a dynamic force against the form.

Nailer end caps position sleeve precisely in form

Specially designed end caps provide an ideal method for attaching Century-Line™ sleeves to the concrete forms. The end caps assure that the sleeve holds its circular configuration during the pour. In addition to keeping out wet concrete, they also prevent dirt from entering the sleeve during backfill operations or the interim construction period.

Tough high density polyethylene (HDPE) construction

High-impact resistant HDPE also provides excellent resistance to acids, alkalis and other organic solvents. Ideal for cathodic protection systems, these non-conductive sleeves will not rust, corrode or degrade. Low-temperature properties are such that they may be installed under any weather conditions suitable for pouring concrete. High temperature application limit is 150º F (66º C). The sleeve is molded with a texture on the outside surface to assure a better bond than most plastic to concrete interfaces.

Used for shotcrete wall applications

For shotcrete applications, Century-Line™ sleeves are easily positioned to wall form with threaded rod, and the end caps protect the sleeve penetration while the wall is formed.  

Nesting of Sleeves

Allow for a 2” (50.8 mm) minimum clearance between wall sleeves/ water-stop collars for concrete pour.

SPECIFICATIONS

  • Standard sleeves are 16” (406 mm) in length. Sleeves may be cut shorter at the job site with ordinary hand tools.
  • Longer length models may also be quickly fabricated as a custom ordered item.
  • 16 sizes - 2” (50.8 mm) to 25” (635 mm) in diameter (Local stock, drop ship overnight).

APPLICATIONS

  • Shotcrete

Resources

Customer Service

Customer Service Inquiries
Phone (Office):
Fax:
+1 713 747 6029
Regions:
North America
Inside Sales Manager
Arthur Hernandez
Phone (Office):
Fax:
+1 713 391 2803
Regions:
North America

Product Manager

Product Manager - Pipeline Accessories
Phone (Office):
Fax:
+1 713 747 6029
Regions:
North America

Sales

Customer Service Inquiries
Phone (Office):
Fax:
+1 713 747 6029
Regions:
North America
Inside Sales Manager
Arthur Hernandez
Phone (Office):
Fax:
+1 713 391 2803
Regions:
North America
Regional Sales Manager
Dinesh Adwani
Phone (Office):
Fax:
+971 4 8833682
Regions:
Middle East
Regional Manager
Richard Edwin
Phone (Office):
Fax:
+971 4 883 3682
Regions:
Africa, Middle East
Regional Sales Manager
Osama Gad Emam
Email Address:
Phone (Mobile):
Fax:
Regions:
Africa
Sales Manager
Fernando
Phone (Office):
Fax:
+55 11 4789 9011
Regions:
South America
Asia Pacific Regional Manager - Oceania, Bangladesh, Hong Kong, Indonesia, Thailand & Vietnam
Hamilton Hind
Phone (Office):
Regions:
Asia, Oceania
Subject Matter Expert - Oil and Gas
Ian Morris
Phone (Office):
Phone (Mobile):
Fax:
+44 1480 404662
Regions:
Europe
Sales Manager - China
Email Address:
Phone (Office):
Phone (Mobile):
Fax:
+86 21 6477 5793
Regions:
Asia
Regional Sales Director
Kishore Pradhan
Phone (Office):
Fax:
+971 4 883 3682
Regions:
Middle East
Sales
Eduardo Villasmil
Email Address:
Phone (Office):
Regions:
Central America, South America
Subject Matter Expert Oil & Gas - Malaysia, Brunei, Singapore, Taiwan, Philippines & Myanmar
Wilson Wee
Phone (Office):
Regions:
Asia